KW V3 Coilovers Supra MK5

£2,440.00 ex. VAT £2,928.00 inc. VAT

SKU: 352200CG Category:

Description

KW Variant 3 Coilovers for the Toyota GR Supra MK5.

With a weight distribution of almost 50:50, rear-wheel drive and a turbocharged 340 hp three-liter six-cylinder in-line engine, the new Toyota GR Supra (JTSC) is a worthy successor of the legendary Toyota Supra Mk4.

The long wait for fans of Japanese sports cars is now over and the Coupé is a blast. So, as soon as the sporty Toyota is available, the suspension manufacturer KW automotive already offers a coilover suspension kit.

The KW Coilover suspensions provide a significant performance gain and are appreciated by car enthusiasts worldwide. This is mainly due to our multi-valve technology used in the dampers with preconfigured high-speed valves and adjustable low-speed valves for the compression and rebound forces. It enables us to achieve driving behavior as tight as necessary and as comfortable as possible.

This damper technology is based on KW motorsport developments. For example, at the Nurburgring 2019 24-hour race, the Toyota Supra Gazoo Racing Team also used KW motorsport suspension with separately adjustable compression and rebound dampers.

The factory preconfigured high-speed valves enable harmonious suspension travel even with a stiff adjusted damper setup. These high-speed valves open in a flash even at maximum lowering and fast driving over transverse joints or bumps. The Coupé does not get bumpy on motorway bridges with transverse joints and remains safely controllable at the limits of driving dynamics in daily life.

The adjustable dampers make it possible to adjust the already preset and recommended suspension setup for the Toyota GR Supra further for a personal driving experience for everyday use. With 16 clicks, the cross-section in the low-speed valve can be reduced or enlarged to precisely adjust the damping with every click.

If the rebound valve is opened, driving comfort increases. If it is closed, the pitch and roll movements of the body structure are significantly reduced and handling becomes even more dynamic.

Simply put, the task of the rebound stage is to connect the body to the road, while the compression stage influences the compression and supports the chassis.

In addition, the adjustable low-speed pressure stage can be closed or opened with twelve clicks to further influence the steering behavior and grip level of the tires.

Despite the low center of gravity of the GR Supra our KW Variant 3 Coilover allows a stepless lowering of 15 – 35 millimeters on the front axle and 20 – 40 millimeters on the drive axle.

During installation, the cancellation kit is connected via a compatible plug-in connection and besides the adaptive damper control, all assistance and driving dynamics systems of the Toyota GR Supra remain active.

Cutting-edge motor sports technology for more performance on the road. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your own driving preferences or vehicle changes such as weight, tire characteristics or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate – a scenario which results in reduced grip and the associated loss of performance.

The KW coilover kit Variant 3 “inox-line” is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness at their vehicles. The dampers with their “TVR-A” and “TVC-A” technology that are separately adjustable in rebound and compression damping allow an extensive damper setup. So it is easy to directly influence the steering behavior, directional stability, tire grip and handling characteristics for a safe controllability at the limit.

TVR-A rebound stage damping (Twin Valve Rebound – Adjustable):

The two-step, patented “TVR-A” technology enables the small volume to flow through an adjustable, conical low-speed bypass in the case of slow damper speeds, while in the case of higher piston speeds, the main rebound stage valve opens for the large volume flows. This provides a big improvement in terms of ride comfort without influencing the high-speed in the safety-relevant range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control.

TVC-A compression stage damping (Twin Valve Compression – Adjustable):

With 12 precise clicks the adjustable compression stage valve (“TVC-A”-technology) can increase or decrease the cross section in the low-speed valve to achieve either more or less compression stage damping. At the same time, in the case of sudden high piston speeds, the spring pre-tensioned needle valve and the spring pre-tensioned main valve open to their maximum valve cross section, to avoid with its blow-off characteristics undesired progressive force increase in the high-speed range. This allows a better bracing of the vehicle body and at the same time at high wheel acceleration offering more comfort than with conventional valve technology. The compression stage damper setting is always supplied in combination with a separate rebound stage setting, as only an independent 2-way damper setting allows a true performance optimization.

The KW Variant 3 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuously lowering can be varied quickly and easily, even after the years.

As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit.

After all, you do not buy just any coilover kit, but a KW coilover kit that has been specially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 3 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.

For more than 20 years, we as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”.

Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in our company headquarters in Fichtenberg in order to meet the high standards of our KW quality management. So for us as a German manufacturer, it is important that we guarantee a several-year warranty on our KW coilover kits, which exceed the original equipment manufacturer quality, as well as suspension solutions which include more than 4,600 applications.

Additional information

Weight 20.0000 kg
Brand

Manufacturer Name

To top