Link CAN Lambda

Description

If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.

Please note proper CAN protocol must be followed. See manual below for guidance.

Specifications

• 1 x 4 pin male DTM connector (power/CAN)
• 1 x 6 pin mating connector for LSU 4.9 Lambda sensor

Dimensions
Enclosure 60 x 26 x 15mm
Lead length 170mm
Weight 70g

Input Voltage
Controller 7.5 – 20 V
Sensor 10.8 – 16.5 V

Input Current
Controller 100 mA
Sensor Heater 8 A

Operating Temp -20 – 100 deg.C
Sensor Bosch LSU4.9
Sensing Range 0.67 – 10 lambda

CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s