Haltech Pro Tuner “Knock Ears” Kit Dual Channel 2014 Spec

Description

Pro Tuner “Knock Ears” Kit – Dual Channel 2014 Spec

 Two x 2 wire knock sensors with AMP style connector.
 Single 3 wire knock sensor lead with shield for
connection to 1 knock sensor.
 Dual 3 wire knock sensor leads with shield for connection
to 2 knock sensors.
 Dual sensor sensitivity adjustment for fine tuning of the
knock sensors.
 Stereo listening through professional industrial quality
headset and ipod style ear pieces.
 Dual overall volume control on headset.
 Selectable switch for 1 sensor use, converts to mono
listening through headset.
 Cigarette power supply lead.
 Battery power supply lead with alligator clips for attachment to battery.
 Spares kit, assorted terminals for loom repairs.
 Plastic case with laser engraving.
 5 year warranty on Knock Unit.
 1 year conditional warranty on all other components

 Aircraft quality headsets
 Passive noise cancelling
 Dual volume controls
 Foam ear pads
 3 Core shielded cable
 Molex connector
 Power supply x 2
 2 Wire knock sensors

General Tips

Mount sensors on block as high as possible near cylinder head.

Try not to mount near rockers as high tappet noise will occur.

Keep wiring and sensors away from exhaust heat as much as possible and if needed make heat shield to
protect them.

If the two sensors are mounted in different positions, use the sensor balance to even out the sound, so that the
sound is even in the headset.

If 1 sensor is to be used only, select sensor 1 on sensor select switch and use sensor 1 connector only.

Use the volume control to adjust the overall volume in the headset and set to a comfortable level.

Disconnect power supply from battery when not in use or your battery will go flat.

Treat knock sensors with the utmost care. Do not drop them.

The unit has a selectable switch for 1 or 2 sensors.
Power Supply Specifications

Powered from any 12 volt power supply.

Fused on both positive and negative using 0.25 amp fuses.

Over voltage protected.

Reverse polarity protected.

HT-070104_QSG (1)