AP Racing Formula 6 pot 356mm Front Brake Upgrade Kit Supra JZA80 & Aristo.
These have been designed for everyday road use and weekend track use in mind. They will reduce braking effort and give more responsive late braking confidence when used on the track. They also resist fade after repeated high speed stops, but are still able to cope with day to day motoring.
All Performance Road Brake Calipers use conventional seals in conjunction with a dirt seal and are finished with a black PTFE based paint coating which is impervious to normal brake fluids & high brake temperatures, with the AP Racing logo highlighted in yellow, or gloss red with the logo highlighted in white.
All brackets are individually designed for each application in either hard anodised aluminium or steel.
The bells are lightweight aluminium alloy, and hard anodised for durability. Each mounting bell is specifically designed for the
The discs used in the AP Racing brake kits have been selected from our extensive race proven range which are synonymous with performance & quality throughout the racing world.
Sizes Ø285 (11.22″) to Ø362mm (14.25″) x 25.4mm (1.0″) to 36mm (1.4″) thick.
Almost all AP Racing brake kits come complete with our own APF404 pads. These are ideally suited for all round performance road use. We can advise on, or specify and supply alternative pads specifically for track days.
In most cases the appropriate Goodridge TUV approved steel braided hoses with nylon armour protection are supplied with each kit.
IMPORTANT NOTE – ROAD APPROVAL FOR BRAKE HOSES
In order to meet the requirements of the TUV, the FMVSS106, SVA and SAE 1401 standards for brake lines for road going vehicles, all fittings must be permanently attached to the hose.
RE-USABLE OR THREADED ATTACHED FITTINGS MAY NOT BE USED. ALL FITTINGS MUST BE CRIMPED OR SWAGED TO THE HOSE WHETHER THE HOSE IS RUBBER OR BRAIDED STEEL .
All Goodridge factory manufactured brake line kits are crimped and meet the requirements of the DOT and SAE. For full TUV approval, lines must pass a series of tests and be assembled in an approved assembly unit that meets all the requirements of the TUV office, including traceability. Consult the braided steel brake line experts Goodridge, if you are in any doubt on +441392369090.
Each kit contains a comprehensive installation guide and list of tightening torques. All mounting bolts & nuts are of high tensile steel and come with a sachet of Loctite 262. Shim washers are supplied in each kit to allow accurate positioning of the caliper on the brake disc, and allow for tolerance variations in different hubs/uprights.
All kits have 2 bottles of AP Racing Formula Dot 5.1 Brake & Clutch Fluid included.