A couple of updates, wont be anymore for a couple of weeks as the car is having the roll cage made and then off to have the exhaust made a tad quieter. Anyway, I removed the ABS unit from under the engine bay, as you can see it leaves a nice big space for other bits and bobs. I’m going to have my catch tank and power steering tank in this area now, along with the HKS DLi and Aeromotive FPR. The resistor pack was mounted here before, I’ll be rewiring that into the inner wing so its hidden out of the way. Also fitted a new master cylinder just as a matter of course. You’ll see braided lines going to the master cylinder, one connects up with the Tilton bias valve on the rear brakes and the other end into a t-piece for the front brakes.