Preparation for 2009 TA series (cont…)

Darren decided to sort out the dash wiring loom, a lot of it isn’t needed anymore as the car has no ABS, stock clocks, heater, etc.

This is the loom as it comes out of the car …

[singlepic id=17 w=320 h=240 float=none]

… All the wires/connectors that aren’t needed anymore ….

[singlepic id=19 w=320 h=240 float=none]

Nice new loom all taped up ready to go back in …

[singlepic id=18 w=320 h=240 float=none]

Extra holes meshed up, also fitted the towing eye. This was just welded straight on to the chassis leg.
[singlepic id=26 w=320 h=240 float=none]

[singlepic id=27 w=320 h=240 float=none]

Looks a bit meaner from the front now …

[singlepic id=28 w=320 h=240 float=none]

[singlepic id=29 w=320 h=240 float=none]